tanxunhong

Members
  • Content count

    203
  • Joined

  • Last visited

  • Days Won

    3

tanxunhong last won the day on October 25 2016

tanxunhong had the most liked content!

Community Reputation

16 Good

About tanxunhong

  • Rank
    Member
  1. Dear Fellow Subaru Owners, I have a few following item to clear from my previous 2007 Hawkeye STI. Please contact me if you need any parts, 94248803 1. AP Racing CP9200 Front 6P Brake kit. Full set with AP caliper, AP brake pad, AP brake disc, Steel braided hose Fitting on 2007 Hawkeye STI, PCD5x114.3 previously. Bought brand new at $3800 fitting locally. Brake disc measured at 85% Brake pad measured at 75% Brake caliper no scratch mark or paint chip. Looking at $2500 (Slight Nego) 2. Blitz FMIC with custom reverse manifold piping and reverse mount. $600 3. Kamak Equal length extractor with Tial 44mm wastegate wielded on uppipe. Done proper to escape being seen by LTA. Please offer me your best price
  2. Dear fellow Subaru Owners, Understand that the previous GD model aircon compressor commonly having the clinking noise when cutting in and out, cause by the rubber on the compressor pulley falling out. Many workshop recommend to replace either the whole compressor or the pulley which problem will reoccur again after a period thus it is a waste of money. I have previously helped many bros here and my own ride to fixed a "special" rubber which resolve the issue at a low cost. Any bros with similar issue and wish to get it fixed, do contact me at 94248803 for an appointment to get it fixed. The cost of the replacement as per following, 1. Per Rubber $30.00 2. Labour charge (regardless of how many rubber) $30.00 Therefore, example, if you have 2pc of rubber falling out, will be $30.00 x 2 = $60.00 + $30.00(labour) = $90.00 Please refer to the photo for the compressor that is affected.
  3. Dear fellow Subaru Owners, Understand that the previous GD model aircon compressor commonly having the clinking noise when cutting in and out, cause by the rubber on the compressor pulley falling out. Many workshop recommend to replace either the whole compressor or the pulley which problem will reoccur again after a period thus it is a waste of money. I have previously helped many bros here and my own ride to fixed a "special" rubber which resolve the issue at a low cost. Any bros with similar issue and wish to get it fixed, do contact me at 94248803 for an appointment to get it fixed. The cost of the replacement as per following, 1. Per Rubber $30.00 2. Labour charge (regardless of how many rubber) $30.00 Therefore, example, if you have 2pc of rubber falling out, will be $30.00 x 2 = $60.00 + $30.00(labour) = $90.00 Please refer to the photo for the compressor that is affected.
  4. Dear fellow Subaru Owners, Understand that the previous GD model aircon compressor commonly having the clinking noise when cutting in and out, cause by the rubber on the compressor pulley falling out. Many workshop recommend to replace either the whole compressor or the pulley which problem will reoccur again after a period thus it is a waste of money. I have previously helped many bros here and my own ride to fixed a "special" rubber which resolve the issue at a low cost. Any bros with similar issue and wish to get it fixed, do contact me at 94248803 for an appointment to get it fixed. The cost of the replacement as per following, 1. Per Rubber $30.00 2. Labour charge (regardless of how many rubber) $30.00 Therefore, example, if you have 2pc of rubber falling out, will be $30.00 x 2 = $60.00 + $30.00(labour) = $90.00 Please refer to the photo for the compressor that is affected.
  5. Dear fellow Subaru Owners, Understand that the previous GD model aircon compressor commonly having the clinking noise when cutting in and out, cause by the rubber on the compressor pulley falling out. Many workshop recommend to replace either the whole compressor or the pulley which problem will reoccur again after a period thus it is a waste of money. I have previously helped many bros here and my own ride to fixed a "special" rubber which resolve the issue at a low cost. Any bros with similar issue and wish to get it fixed, do contact me at 94248803 for an appointment to get it fixed. The cost of the replacement as per following, 1. Per Rubber $30.00 2. Labour charge (regardless of how many rubber) $30.00 Therefore, example, if you have 2pc of rubber falling out, will be $30.00 x 2 = $60.00 + $30.00(labour) = $90.00 Please refer to the photo for the compressor that is affected.
  6. Dear bros, i have some leftover parts for my 2007 Hawkeye sti to be cleared. Please do text me at 94248803 if you are keen in any of the item. 1. AP Racing CP9200 6pot with 345mm original AP disc Rotor and brake pad. Item is at 85% condition, used less than 1year bought brand new with no paint damage on the caliper. Disc rotor measured at 85%, original AP brake pad measured at 75%. It was fitted on 5x114.3 pcd and driving less than 5000km on it. Please offer me your best price 2. Equal length extractor with Tial 44mm wastegate wielded on uppipe. Done proper to escape being seen by LTA. Please offer me your best price 3. Works Engineering fuel rail system with steel braided hose set. Please offer me your best price Thank you
  7. Hi all, i have a set of widebody to let go as my vehicle has been scrap and looking to clear it off. the bodykit set includes, 1. Front voltex bumper with custom flare 2. Seibon fender with custom flare 3. Custom side skirt for rear varis widebody 4. Rear varis 2pc wide body 5. Sti bumper Looking to let go the whole set at $500fixed C&C please contact me at 94248803 to deal directly
  8. I have scrap my vehicle last year and have some remaining items that is planning to lelong as i have no space to keep anymore. To all who are interested, please contact me at 94248803 directly to deal. All item are ready for collection and cash&carry 1. Red JDM Long Runner Spec C manifold Looking at $150 2. Works Engineering Fuel Rail with custom fuel steel braided fuel line Looking at $200.00 3. Sard Big Fuel Regulator Looking at $100.00 4. Alternator Looking at $100 5. Kamak Equal Length Extractor with Uppipe weld with tial 44mm wastegate external vent ( LTA friendly ) Looking at $400.00 6. Stock 2.0L downpipe decatted Looking at $100 7. Front Lower Arm with custom teflon bushing for better handling Looking at $200 for 1 pair 8. Rear Custom adjustable STI Pink lateral link Looking at $200 whole set 9. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock bumper ( please take note it is replica. Looking at whole set to go at $500 (FIXED) 46. Front cabring alum struct bar with brake stopper Looking at $150 47. Rear App or cabring alum struct bar Looking at $150 Take 46 & 47 together at $200
  9. all the item you want are sold. sorry bro.
  10. add-on. * EURO 6speed STI gearbox whole kit. Comes with front gearbox, rear diff, 4 knuckle and drive shaft, propeller shaft. Letting go the whole set at 1k cash & carry.
  11. UPZZZ. 36. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock bumper ( please take note it is replica. ) Looking at whole set to go at $1000 *revised* the rest of the item is still available
  12. hi bro. i have 07 sti rear bumper for sale in blue. if interested text me at 94248803
  13. Hi all bros, My ride has already scraped & all stuff is out ready for collection.d please text me at 94248803 to deal straight Items to let go as per the following below, 4. Red JDM Long Runner Spec C manifold Looking at $200 5. Works Engineering Fuel Rail with custom fuel steel braided fuel line Looking at $300.00 6. Sard Big Fuel Regulator Looking at $150.00 7. ARC Radiator together with custom evo9 radiator for maximum cooling ( cruising at less than 80deg, hot weather traffic jam less than 85deg ) Looking at $500 *revised* 10. Alternator Looking at $100 12. Kamak Equal Length Extractor with Uppipe weld with tial 44mm wastegate external vent ( LTA friendly ) Looking at $500.00 13. Stock 2.0L downpipe decatted Looking at $100 16. Front Lower Arm with custom teflon bushing for better handling Looking at $300 for 1 pair 18. Rear Custom adjustable STI Pink lateral link Looking at $200 whole set 33. Apexi Turbo Timer Looking at $80 36. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock bumper ( please take note it is replica. ) together with Original Volks Racing CE28N, 18x9.5 offset 15 PCD114.3 with dunlop 265/35/18 tyre, thread 70% ( please note 1pc of the tyre is bloated & require replacement ) Looking at whole set to go at $2800 *revised* 46. Front cabring alum struct bar with brake stopper Looking at $150 47. Rear App or cabring alum struct bar Looking at $150 Take 46 & 47 together at $200