tanxunhong

Members
  • Content count

    203
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by tanxunhong

  1. Dear Fellow Subaru Owners, I have a few following item to clear from my previous 2007 Hawkeye STI. Please contact me if you need any parts, 94248803 1. AP Racing CP9200 Front 6P Brake kit. Full set with AP caliper, AP brake pad, AP brake disc, Steel braided hose Fitting on 2007 Hawkeye STI, PCD5x114.3 previously. Bought brand new at $3800 fitting locally. Brake disc measured at 85% Brake pad measured at 75% Brake caliper no scratch mark or paint chip. Looking at $2500 (Slight Nego) 2. Blitz FMIC with custom reverse manifold piping and reverse mount. $600 3. Kamak Equal length extractor with Tial 44mm wastegate wielded on uppipe. Done proper to escape being seen by LTA. Please offer me your best price
  2. Dear fellow Subaru Owners, Understand that the previous GD model aircon compressor commonly having the clinking noise when cutting in and out, cause by the rubber on the compressor pulley falling out. Many workshop recommend to replace either the whole compressor or the pulley which problem will reoccur again after a period thus it is a waste of money. I have previously helped many bros here and my own ride to fixed a "special" rubber which resolve the issue at a low cost. Any bros with similar issue and wish to get it fixed, do contact me at 94248803 for an appointment to get it fixed. The cost of the replacement as per following, 1. Per Rubber $30.00 2. Labour charge (regardless of how many rubber) $30.00 Therefore, example, if you have 2pc of rubber falling out, will be $30.00 x 2 = $60.00 + $30.00(labour) = $90.00 Please refer to the photo for the compressor that is affected.
  3. Dear fellow Subaru Owners, Understand that the previous GD model aircon compressor commonly having the clinking noise when cutting in and out, cause by the rubber on the compressor pulley falling out. Many workshop recommend to replace either the whole compressor or the pulley which problem will reoccur again after a period thus it is a waste of money. I have previously helped many bros here and my own ride to fixed a "special" rubber which resolve the issue at a low cost. Any bros with similar issue and wish to get it fixed, do contact me at 94248803 for an appointment to get it fixed. The cost of the replacement as per following, 1. Per Rubber $30.00 2. Labour charge (regardless of how many rubber) $30.00 Therefore, example, if you have 2pc of rubber falling out, will be $30.00 x 2 = $60.00 + $30.00(labour) = $90.00 Please refer to the photo for the compressor that is affected.
  4. Dear fellow Subaru Owners, Understand that the previous GD model aircon compressor commonly having the clinking noise when cutting in and out, cause by the rubber on the compressor pulley falling out. Many workshop recommend to replace either the whole compressor or the pulley which problem will reoccur again after a period thus it is a waste of money. I have previously helped many bros here and my own ride to fixed a "special" rubber which resolve the issue at a low cost. Any bros with similar issue and wish to get it fixed, do contact me at 94248803 for an appointment to get it fixed. The cost of the replacement as per following, 1. Per Rubber $30.00 2. Labour charge (regardless of how many rubber) $30.00 Therefore, example, if you have 2pc of rubber falling out, will be $30.00 x 2 = $60.00 + $30.00(labour) = $90.00 Please refer to the photo for the compressor that is affected.
  5. Dear fellow Subaru Owners, Understand that the previous GD model aircon compressor commonly having the clinking noise when cutting in and out, cause by the rubber on the compressor pulley falling out. Many workshop recommend to replace either the whole compressor or the pulley which problem will reoccur again after a period thus it is a waste of money. I have previously helped many bros here and my own ride to fixed a "special" rubber which resolve the issue at a low cost. Any bros with similar issue and wish to get it fixed, do contact me at 94248803 for an appointment to get it fixed. The cost of the replacement as per following, 1. Per Rubber $30.00 2. Labour charge (regardless of how many rubber) $30.00 Therefore, example, if you have 2pc of rubber falling out, will be $30.00 x 2 = $60.00 + $30.00(labour) = $90.00 Please refer to the photo for the compressor that is affected.
  6. Dear bros, i have some leftover parts for my 2007 Hawkeye sti to be cleared. Please do text me at 94248803 if you are keen in any of the item. 1. AP Racing CP9200 6pot with 345mm original AP disc Rotor and brake pad. Item is at 85% condition, used less than 1year bought brand new with no paint damage on the caliper. Disc rotor measured at 85%, original AP brake pad measured at 75%. It was fitted on 5x114.3 pcd and driving less than 5000km on it. Please offer me your best price 2. Equal length extractor with Tial 44mm wastegate wielded on uppipe. Done proper to escape being seen by LTA. Please offer me your best price 3. Works Engineering fuel rail system with steel braided hose set. Please offer me your best price Thank you
  7. Hi all, i have a set of widebody to let go as my vehicle has been scrap and looking to clear it off. the bodykit set includes, 1. Front voltex bumper with custom flare 2. Seibon fender with custom flare 3. Custom side skirt for rear varis widebody 4. Rear varis 2pc wide body 5. Sti bumper Looking to let go the whole set at $500fixed C&C please contact me at 94248803 to deal directly
  8. I have scrap my vehicle last year and have some remaining items that is planning to lelong as i have no space to keep anymore. To all who are interested, please contact me at 94248803 directly to deal. All item are ready for collection and cash&carry 1. Red JDM Long Runner Spec C manifold Looking at $150 2. Works Engineering Fuel Rail with custom fuel steel braided fuel line Looking at $200.00 3. Sard Big Fuel Regulator Looking at $100.00 4. Alternator Looking at $100 5. Kamak Equal Length Extractor with Uppipe weld with tial 44mm wastegate external vent ( LTA friendly ) Looking at $400.00 6. Stock 2.0L downpipe decatted Looking at $100 7. Front Lower Arm with custom teflon bushing for better handling Looking at $200 for 1 pair 8. Rear Custom adjustable STI Pink lateral link Looking at $200 whole set 9. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock bumper ( please take note it is replica. Looking at whole set to go at $500 (FIXED) 46. Front cabring alum struct bar with brake stopper Looking at $150 47. Rear App or cabring alum struct bar Looking at $150 Take 46 & 47 together at $200
  9. Hi all bros, My ride has already scraped & all stuff is out ready for collection.d please text me at 94248803 to deal straight Items to let go as per the following below, 4. Red JDM Long Runner Spec C manifold Looking at $200 5. Works Engineering Fuel Rail with custom fuel steel braided fuel line Looking at $300.00 6. Sard Big Fuel Regulator Looking at $150.00 7. ARC Radiator together with custom evo9 radiator for maximum cooling ( cruising at less than 80deg, hot weather traffic jam less than 85deg ) Looking at $500 *revised* 10. Alternator Looking at $100 12. Kamak Equal Length Extractor with Uppipe weld with tial 44mm wastegate external vent ( LTA friendly ) Looking at $500.00 13. Stock 2.0L downpipe decatted Looking at $100 16. Front Lower Arm with custom teflon bushing for better handling Looking at $300 for 1 pair 18. Rear Custom adjustable STI Pink lateral link Looking at $200 whole set 33. Apexi Turbo Timer Looking at $80 36. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock bumper ( please take note it is replica. ) together with Original Volks Racing CE28N, 18x9.5 offset 15 PCD114.3 with dunlop 265/35/18 tyre, thread 70% ( please note 1pc of the tyre is bloated & require replacement ) Looking at whole set to go at $2800 *revised* 46. Front cabring alum struct bar with brake stopper Looking at $150 47. Rear App or cabring alum struct bar Looking at $150 Take 46 & 47 together at $200
  10. Hi all bros, my ride is due to scrap in 2017mar but might be pushing in early, have not yet to decide thus wish to check if anybody is interested in the parts.
  11. all the item you want are sold. sorry bro.
  12. add-on. * EURO 6speed STI gearbox whole kit. Comes with front gearbox, rear diff, 4 knuckle and drive shaft, propeller shaft. Letting go the whole set at 1k cash & carry.
  13. UPZZZ. 36. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock bumper ( please take note it is replica. ) Looking at whole set to go at $1000 *revised* the rest of the item is still available
  14. hi bro. i have 07 sti rear bumper for sale in blue. if interested text me at 94248803
  15. Hi All bros, I have scrap my 07 hawkeye STI and the sales of parts has been going well with some remaining item that have not yet to let go to another. If interested, please let me at 94248803 to deal. The item is all ready for collection. Items to let go as per the following below, 3. Apexi Rx6 offset turbo together with custom exhaust adapter for offset with custom downpipe Looking at $500 4. Red JDM Long Runner Spec C manifold Looking at $150 *REVISED 5. Works Engineering Fuel Rail with custom fuel steel braided fuel line Looking at $300 6. Sard Big Fuel Regulator Looking at $150 7. ARC Radiator together with custom evo9 radiator for maximum cooling ( cruising at less than 80deg, hot weather traffic jam less than 85deg ) Looking at $500 *revised* 8. Greddy Type R blow off valve Looking at $200 9. 2007 Euro Spec 6spd gearbox comes with rear diff, drive shaft comes with perrin rear diff cover whole set. Looking at $1000 10. Alternator Looking at $100 *REVISED 12. Kamak Equal Length Extractor with Uppipe weld with tial 44mm wastegate external vent ( LTA friendly ) looking at $600 13. Stock 2.0L downpipe decatted Looking at $100 16. Front Lower Arm with custom teflon bushing for better handling Looking at $300 for 1 pair 18. Rear Custom adjustable STI Pink lateral link Looking at $300 whole set 33. Apexi Turbo Timer Looking at $80 36. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock rear bumper ( please take note it is replica. ) Looking at whole set to go at $1000 *revised* 46. Front cabring alum struct bar with brake stopper Looking at $150 47. Rear App or cabring alum struct bar Looking at $150 Take 46 & 47 together at $200
  16. Hi All bros, I have scrap my 07 hawkeye STI and the sales of parts has been going well with some remaining item that have not yet to let go to another. If interested, please let me at 94248803 to deal. The item is all ready for collection. Items to let go as per the following below, 3. Apexi Rx6 offset turbo together with custom exhaust adapter for offset with custom downpipe *RESERVED BY XXXX4068 4. Red JDM Long Runner Spec C manifold Looking at $200 *REVISED 5. Works Engineering Fuel Rail with custom fuel steel braided fuel line *RESERVED BY XXXX4068 6. Sard Big Fuel Regulator *RESERVED BY XXXX4068 7. ARC Radiator together with custom evo9 radiator for maximum cooling ( cruising at less than 80deg, hot weather traffic jam less than 85deg ) Looking at $600 *revised* 8. Greddy Type R blow off valve Looking at $200 10. Alternator Looking at $100 *REVISED 12. Kamak Equal Length Extractor with Uppipe weld with tial 44mm wastegate external vent ( LTA friendly ) *RESERVED BY XXXX4068 13. Stock 2.0L downpipe decatted Looking at $100 16. Front Lower Arm with custom teflon bushing for better handling Looking at $300 for 1 pair 18. Rear Custom adjustable STI Pink lateral link Looking at $300 whole set 33. Apexi Turbo Timer Looking at $80 36. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock rear bumper ( please take note it is replica. ) Looking at whole set to go at $1500 *revised* 41. autronic SM4 standalone ECM with wiring harness Looking at $500 45. Rear Brembo 2p 5x114.3 rear slotted disc rotor without swap Looking at $500 46. Front cabring alum struct bar with brake stopper Looking at $150 47. Rear App or cabring alum struct bar Looking at $150 Take 46 & 47 together at $200
  17. Hi all bros, My ride is currently in the workshop & most stuff is out ready for collection. Interested please text me at 94248803 to deal straight Items to let go as per the following below, 3. Apexi Rx6 offset turbo together with custom exhaust adapter for offset with custom downpipe *RESERVED BY XXXX4068 4. Red JDM Long Runner Spec C manifold Looking at $300 5. Works Engineering Fuel Rail with custom fuel steel braided fuel line *RESERVED BY XXXX4068 6. Sard Big Fuel Regulator *RESERVED BY XXXX4068 7. ARC Radiator together with custom evo9 radiator for maximum cooling ( cruising at less than 80deg, hot weather traffic jam less than 85deg ) Looking at $600 *revised* 8. Greddy Type R blow off valve Looking at $200 10. Alternator Looking at $200 12. Kamak Equal Length Extractor with Uppipe weld with tial 44mm wastegate external vent ( LTA friendly ) *RESERVED BY XXXX4068 13. Stock 2.0L downpipe decatted Looking at $200 16. Front Lower Arm with custom teflon bushing for better handling Looking at $300 for 1 pair 18. Rear Custom adjustable STI Pink lateral link Looking at $300 whole set 19. 6Speed Euro spec gearbox with 3.9 final drive with DCCD, comes with driveshaft whole set Looking at $1500 *gearbox whole set with driveshaft, knuckle NO SWAP REQUIRE 22. Blitz SBC ID boost controller black Looking at $300 23. Defi BF Amber meter gauge with cabring carbon hood ( Boost, Oil temp, Oil Press, Water Temp ) *reserved by xxxx 24. STI Optitron Speedometer 260km/hr with DCCD *reserved by xxxx6760 33. Apexi Turbo Timer Looking at $80 36. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock bumper ( please take note it is replica. ) Looking at whole set to go at $2000 *revised* 38. Rear Original Taillamp Looking at $200 (pair) 40. Original carbon print ganador side mirror ( Minor scratch on the left side ) Looking at $250 41. autronic SM4 standalone ECM with wiring harness Looking at $600 42. BCBR Suspension for PCD114.3x5 ( no oil leak or knocking noise ) Looking at $300 45. Rear Brembo 2p 5x114.3 rear slotted disc rotor without swap Looking at $500 46. Front cabring alum struct bar with brake stopper Looking at $150 47. Rear App or cabring alum struct bar Looking at $150 Take 46 & 47 together at $200
  18. (UPDATED ON 23/09/2016) Hi all bros, My ride is currently in the workshop & most stuff is out ready for collection. Interested please text me at 94248803 to deal straight Items to let go as per the following below, 2. Cusco 1.5Way Rear LSD for R180 Looking at $300.00 3. Apexi Rx6 offset turbo together with custom exhaust adapter for offset with custom downpipe *RESERVED BY XXXX4068 4. Red JDM Long Runner Spec C manifold Looking at $300 5. Works Engineering Fuel Rail with custom fuel steel braided fuel line *RESERVED BY XXXX4068 6. Sard Big Fuel Regulator *RESERVED BY XXXX4068 7. ARC Radiator together with custom evo9 radiator for maximum cooling ( cruising at less than 80deg, hot weather traffic jam less than 85deg ) Looking at $600 *revised* 8. Greddy Type R blow off valve Looking at $200 10. Alternator Looking at $200 12. Kamak Equal Length Extractor with Uppipe weld with tial 44mm wastegate external vent ( LTA friendly ) *RESERVED BY XXXX4068 13. Stock 2.0L downpipe decatted Looking at $200 16. Front Lower Arm with custom teflon bushing for better handling Looking at $300 for 1 pair 18. Rear Custom adjustable STI Pink lateral link Looking at $300 whole set 19. 6Speed Euro spec gearbox with 3.9 final drive with DCCD, comes with driveshaft whole set Looking at $1500 *gearbox whole set with driveshaft, knuckle NO SWAP REQUIRE 22. Blitz SBC ID boost controller black Looking at $300 33. Apexi Turbo Timer Looking at $80 36. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock bumper ( please take note it is replica. ) Looking at whole set to go at $2000 *revised* 41. autronic SM4 standalone ECM with wiring harness Looking at $600 42. BCBR Suspension for PCD114.3x5 ( no oil leak or knocking noise ) Looking at $300 45. Rear Brembo 2p 5x114.3 rear slotted disc rotor without swap Looking at $500 46. Front cabring alum struct bar with brake stopper Looking at $150 47. Rear App or cabring alum struct bar Looking at $150 Take 46 & 47 together at $200
  19. *updated on 29/08/2016* Hi all bros, my ride is currently in the workshop to dekit & most parts should be out by next week or end of the month. Items to let go as per the following below, 1. 2.5L forged engine ( no swap, might need a spoiled 2.5 empty block with engine number done by you ) *SOLD* 2. Blitz SE intercooler with custom reverse manifold piping ( require some custom work depending on your setup ) Looking at $600 *revised* 3. Apexi Rx6 offset turbo together with custom exhaust adapter for offset with custom downpipe *RESERVED BY XXXX4068 4. Red JDM Long Runner Spec C manifold Looking at $300 5. Works Engineering Fuel Rail with custom fuel steel braided fuel line *RESERVED BY XXXX4068 6. Sard Big Fuel Regulator *RESERVED BY XXXX4068 7. ARC Radiator together with custom evo9 radiator for maximum cooling ( cruising at less than 80deg, hot weather traffic jam less than 85deg ) Looking at $650 *revised* 8. Greddy Type R blow off valve Looking at $200 9. Power Steering Pump ( bought brand new in 2015 ) *SOLD* 10. Alternator Looking at $200 11. Aircon Compressor *SOLD* 12. Kamak Equal Length Extractor with Uppipe weld with tial 44mm wastegate external vent ( LTA friendly ) *RESERVED BY XXXX4068 13. Stock 2.0L downpipe decatted Looking at $200 14. Trust Exhaust with original silencer & cert ( 1 owner ), light scratch but no dent. Looking at $650 15. Cabring 6 point undercarriage brace ( replacement of stock U-frame, to reduce weight and better handling ) **SOLD** 16. Front Lower Arm with custom teflon bushing for better handling Looking at $300 for 1 pair 17. Cusco front and rear anti roll bar 22mm **SOLD** 18. Rear Custom adjustable STI Pink lateral link Looking at $300 whole set 19. 6Speed Euro spec gearbox with 3.9 final drive with DCCD, comes with driveshaft whole set Looking at $1500 ( If you need the knuckle as well, additional $100 for each side ) 20. Cusco rear T power brace **SOLD** 21. Cusco Lowe Center Brace **SOLD** 22. Blitz SBC ID boost controller black Looking at $300 23. Defi BF Amber meter gauge with cabring carbon hood ( Boost, Oil temp, Oil Press, Water Temp ) Looking at $800 whole set with controller and all sensor 24. STI Optitron Speedometer 260km/hr with DCCD Looking at $250 25. Juran Steering Wheel **SOLD** 26. Worksbell Boss Kit Looking at $150 *RESERVED BY XXXX5905 27. Worksbell Tilt release kit **SOLD** 28. Zeitronix air fuel gauge **SOLD** 29. Sti Blue Passenger Seat Looking at $100 30. STI Blue Rear Passenger Seat Looking at $100 31. STI Blue door panel Looking at $100 for whole set 32. Defi 1st Gen HUD speed display *SOLD* 33. Apexi Turbo Timer Looking at $80 34. STI Alum stock bonnet Looking at $200 *RESERVED BY XXXX9298 35. Voltex Original Type 5 Gt Wing ( top laquer blur off, require to polish ) **SOLD** 36. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock bumper ( please take note it is replica. ) Looking at whole set to go at $2800 *revised* 37. Front STI Original HID Headlamp *SOLD* 38. Rear Original Taillamp Looking at $200 (pair) 39. steering rack sti ( just recondition on june 2016 ) Looking $200 *RESERVED BY XXXX5988 40. Original carbon print ganador side mirror ( Minor scratch on the left side ) Looking at $250 41. autronic SM4 standalone ECM with wiring harness Looking at $600 *RESERVED BY XXXX4359 42. BCBR Suspension for PCD114.3x5 ( no oil leak or knocking noise ) Looking at $300 43. STI Original Rear Roof Vane *SOLD* 44. DW 750cc injector top feed **SOLD** 45. Rear Brembo 2p 5x114.3 rear slotted disc rotor without swap Looking at $500 46. Front cabring alum struct bar with brake stopper Looking at $200 47. Rear App or cabring alum struct bar Looking at $150 Take 46 & 47 together at $300
  20. *UPDATED ON 22/08/2016 Hi all bros, my ride is currently in the workshop to dekit & most parts should be out by next week or end of the month. Items to let go as per the following below, 1. 2.5L forged engine ( no swap, might need a spoiled 2.5 empty block with engine number done by you ) *RESERVED BY CHRIS CP piston 100mm, Rallispec 4340 con-rod, Nitrided Sti Crankshaft, GSC Stage 2 camshaft, port & polish cylinder head, cosworth head stud, standard headgasket & bearings MIleage on engine less than 40,000km, never track before. 2. Blitz SE intercooler with custom reverse manifold piping ( require some custom work depending on your setup ) Looking at $700 3. Apexi Rx6 offset turbo together with custom exhaust adapter for offset with custom downpipe *RESERVED BY XXXX4068 4. Red JDM Long Runner Spec C manifold Looking at $300 5. Works Engineering Fuel Rail with custom fuel steel braided fuel line *RESERVED BY XXXX4068 6. Sard Big Fuel Regulator *RESERVED BY XXXX4068 7. ARC Radiator together with custom evo9 radiator for maximum cooling ( cruising at less than 80deg, hot weather traffic jam less than 85deg ) Looking at $700 8. Greddy Type R blow off valve Looking at $200 9. Power Steering Pump ( bought brand new in 2015 ) Looking at $400 10. Alternator Looking at $200 11. Aircon Compressor Looking at $200 12. Kamak Equal Length Extractor with Uppipe weld with tial 44mm wastegate external vent ( LTA friendly ) *RESERVED BY XXXX4068 13. Stock 2.0L downpipe decatted Looking at $200 14. Trust Exhaust with original silencer & cert ( 1 owner ), light scratch but no dent. Looking at $700 15. Cabring 6 point undercarriage brace ( replacement of stock U-frame, to reduce weight and better handling ) **SOLD** 16. Front Lower Arm with custom teflon bushing for better handling Looking at $300 for 1 pair 17. Cusco front and rear anti roll bar 22mm Looking at $250 for both *RESERVED BY XXXX8905 18. Rear Custom adjustable STI Pink lateral link Looking at $300 whole set 19. 6Speed Euro spec gearbox with 3.9 final drive with DCCD, comes with driveshaft whole set Looking at $1500 buyer bear labour of $200 ( If you need the knuckle as well, additional $100 for each side ) 20. Cusco rear T power brace Looking at $150 *RESERVED BY XXXX9083 21. Cusco Lowe Center Brace Looking at $150 *RESERVED BY XXXX9083 22. Blitz SBC ID boost controller black Looking at $300 23. Defi BF Amber meter gauge with cabring carbon hood ( Boost, Oil temp, Oil Press, Water Temp ) *SOLD* 24. STI Optitron Speedometer 260km/hr with DCCD Looking at $250 *Reserved by XXXX5517 25. Juran Steering Wheel **SOLD** 26. Worksbell Boss Kit Looking at $150 *RESERVED BY XXXX5905 27. Worksbell Tilt release kit **SOLD** 28. Zeitronix air fuel gauge **SOLD** 29. Sti Blue Passenger Seat Looking at $100 30. STI Blue Rear Passenger Seat Looking at $100 31. STI Blue door panel Looking at $100 for whole set 32. Defi 1st Gen HUD speed display *SOLD* 33. Apexi Turbo Timer Looking at $80 34. STI Alum stock bonnet Looking at $200 *RESERVED BY XXXX9298 35. Voltex Original Type 5 Gt Wing ( top laquer blur off, require to polish ) **SOLD** 36. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock bumper ( please take note it is replica. ) Looking at whole set to go at $3000 ( buyer to bear the labour ) 37. Front STI Original HID Headlamp * Reserved* 38. Rear Original Taillamp Looking at $200 (pair) 39. steering rack sti ( just recondition on june 2016 ) Looking $200 *RESERVED BY XXXX5988 40. Original carbon print ganador side mirror ( Minor scratch on the left side ) Looking at $250 41. autronic SM4 standalone ECM with wiring harness Looking at $600 *RESERVED BY XXXX4359 42. BCBR Suspension for PCD114.3x5 Looking at $400 43. STI Original Rear Roof Vane Looking at $70 44. DW 750cc injector top feed *RESERVED BY XXXX3666 45. Rear Brembo 2p 5x114.3 rear slotted disc rotor without swap Looking at $500 46. Front cabring alum struct bar with brake stopper Looking at $200 47. Rear App or cabring alum struct bar Looking at $150
  21. Hi all bros, my ride is due to scrap in 2017mar but might be pushing in early, have not yet to decide thus wish to check if anybody is interested in the parts. Please kindly place a deposit for item to reserve. Appreciate Items to let go as per the following below, 1. 2.5L forged engine ( no swap, might need a spoiled 2.5 empty block with engine number done by you ) Looking at $2500 *RESERVED BY CHRIS CP piston 100mm, Rallispec 4340 con-rod, Nitrided Sti Crankshaft, GSC Stage 2 camshaft, port & polish cylinder head, cosworth head stud, standard headgasket & bearings MIleage on engine less than 40,000km, never track before. 2. Blitz SE intercooler with custom reverse manifold piping ( require some custom work depending on your setup ) Looking at $700 3. Apexi Rx6 offset turbo together with custom exhaust adapter for offset with custom downpipe Looking at $500 *RESERVED BY XXXX4068 4. Red JDM Long Runner Spec C manifold Looking at $300 5. Works Engineering Fuel Rail with custom fuel steel braided fuel line *RESERVED BY XXXX4068 6. Sard Big Fuel Regulator *RESERVED BY XXXX4068 7. ARC Radiator together with custom evo9 radiator for maximum cooling ( cruising at less than 80deg, hot weather traffic jam less than 85deg ) Looking at $700 8. Greddy Type R blow off valve Looking at $200 9. Power Steering Pump ( bought brand new in 2015 ) Looking at $400 10. Alternator Looking at $200 11. Aircon Compressor Looking at $200 12. Kamak Equal Length Extractor with Uppipe weld with tial 44mm wastegate external vent ( LTA friendly ) Looking at $650 *RESERVED BY XXXX4068 13. Stock 2.0L downpipe decatted Looking at $200 14. Trust Exhaust with original silencer & cert ( 1 owner ), light scratch but no dent. *RESERVED BY XXX 15. Cabring 6 point undercarriage brace ( replacement of stock U-frame, to reduce weight and better handling ) Looking at $200 *RESERVED BY XXXX2181 16. Front Lower Arm with custom teflon bushing for better handling Looking at $300 for 1 pair 17. Cusco front and rear anti roll bar 22mm Looking at $250 for both *RESERVED BY XXXX8905 18. Rear Custom adjustable STI Pink lateral link Looking at $300 whole set 19. 6Speed Euro spec gearbox with 3.9 final drive with DCCD, comes with driveshaft whole set Looking at $1500 buyer bear labour of $200 ( If you need the knuckle as well, additional $100 for each side ) 20. Cusco rear T power brace Looking at $150 *RESERVED BY XXXX9083 21. Cusco Lowe Center Brace Looking at $150 *RESERVED BY XXXX9083 22. Blitz SBC ID boost controller black Looking at $300 23. Defi BF Amber meter gauge with cabring carbon hood ( Boost, Oil temp, Oil Press, Water Temp ) *SOLD* 24. STI Optitron Speedometer 260km/hr with DCCD Looking at $250 25. Juran Steering Wheel **SOLD** 26. Worksbell Boss Kit Looking at $150 *RESERVED BY XXXX5905 27. Worksbell Tilt release kit **SOLD** 28. Zeitronix air fuel gauge **SOLD** 29. Sti Blue Passenger Seat Looking at $100 30. STI Blue Rear Passenger Seat Looking at $100 31. STI Blue door panel Looking at $100 for whole set 32. Defi 1st Gen HUD speed display *SOLD* 33. Apexi Turbo Timer Looking at $80 34. STI Alum stock bonnet Looking at $200 *RESERVED BY XXXX9298 35. Voltex Original Type 5 Gt Wing ( top laquer blur off, require to polish ) Looking at $1200 *RESERVED BY XXXX2181 36. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock bumper ( please take note it is replica. ) Looking at whole set to go at $3000 ( buyer to bear the labour ) 37. Front STI Original HID Headlamp Looking at $400 (pair) 38. Rear Original Taillamp Looking at $200 (pair) 39. steering rack sti ( just recondition on june 2016 ) Looking $200 *RESERVED BY XXXX5988 40. Original carbon print ganador side mirror ( Minor scratch on the left side ) Looking at $250 41. autronic SM4 standalone ECM with wiring harness Looking at $600 *RESERVED BY XXXX4359 42. BCBR Suspension for PCD114.3x5 Looking at $400 43. STI Original Rear Roof Vane Looking at $70 *RESERVED BY XXXX4327 44. DW 750cc injector top feed *RESERVED BY XXXX3666 45. Rear Brembo 2p 5x114.3 rear slotted disc rotor without swap Looking at $500 46. Front cabring alum struct bar with brake stopper Looking at $200 47. Rear App or cabring alum struct bar Looking at $150
  22. Hi all bros, my ride will be in the workshop from 29AUG, will send for scrape. I will need deposit once confirm on the item as too many uncertain buyer at the end. please kindly check with your workshop and know what you are buying Items to let go as per the following below, 1. 2.5L forged engine ( no swap, might need a spoiled 2.5 empty block with engine number done by you ) Looking at $2500 **Buyer bear Labour of $300.00** CP piston 100mm, Rallispec 4340 con-rod, Nitrided Sti Crankshaft, GSC Stage 2 camshaft, port & polish cylinder head, cosworth head stud, standard headgasket & bearings MIleage on engine less than 40,000km, never track before. 2. Blitz SE intercooler with custom reverse manifold piping ( require some custom work depending on your setup ) Looking at $700 3. Apexi Rx6 offset turbo together with custom exhaust adapter for offset with custom downpipe Looking at $500 *RESERVED BY XXXX4068 4. Red JDM Long Runner Spec C manifold Looking at $300 5. Works Engineering Fuel Rail with custom fuel steel braided fuel line Looking at $300 ( * Take Number 4&5 together at $500 ) 6. Sard Big Fuel Regulator Looking at $150 7. ARC Radiator together with custom evo9 radiator for maximum cooling ( cruising at less than 80deg, hot weather traffic jam less than 85deg ) Looking at $700 8. Greddy Type R blow off valve Looking at $200 9. Power Steering Pump ( bought brand new in 2015 ) Looking at $400 10. Alternator Looking at $200 11. Aircon Compressor Looking at $200 12. Kamak Equal Length Extractor with Uppipe weld with tial 44mm wastegate external vent ( LTA friendly ) Looking at $650 *RESERVED BY XXXX4068 13. Stock 2.0L downpipe decatted Looking at $200 14. Trust Exhaust with original silencer & cert ( 1 owner ), light scratch but no dent. *RESERVED BY XXX 15. Cabring 6 point undercarriage brace ( replacement of stock U-frame, to reduce weight and better handling ) Looking at $200 *RESERVED BY XXXX2181 16. Front Lower Arm with custom teflon bushing for better handling Looking at $300 for 1 pair 17. Cusco front and rear anti roll bar 22mm Looking at $250 for both *RESERVED BY XXXX8905 18. Rear Custom adjustable STI Pink lateral link Looking at $300 whole set 19. 6Speed Euro spec gearbox with 3.9 final drive with DCCD, comes with driveshaft whole set Looking at $1500 buyer bear labour of $200 ( If you need the knuckle as well, additional $100 for each side ) 20. Cusco rear T power brace Looking at $150 *RESERVED BY XXXX9083 21. Cusco Lowe Center Brace Looking at $150 *RESERVED BY XXXX9083 22. Blitz SBC ID boost controller black Looking at $300 23. Defi BF Amber meter gauge with cabring carbon hood ( Boost, Oil temp, Oil Press, Water Temp ) *SOLD* 24. STI Optitron Speedometer 260km/hr with DCCD Looking at $250 25. Juran Steering Wheel **SOLD** 26. Worksbell Boss Kit Looking at $150 *RESERVED BY XXXX5905 27. Worksbell Tilt release kit **SOLD** 28. Zeitronix air fuel gauge **SOLD** 29. Sti Blue Passenger Seat Looking at $100 30. STI Blue Rear Passenger Seat Looking at $100 31. STI Blue door panel Looking at $100 for whole set 32. Defi 1st Gen HUD speed display *SOLD* 33. Apexi Turbo Timer Looking at $80 34. STI Alum stock bonnet Looking at $200 *RESERVED BY XXXX9298 35. Voltex Original Type 5 Gt Wing ( top laquer blur off, require to polish ) Looking at $1200 *RESERVED BY XXXX2181 36. Front voltex bumper with custom intercooler air vent, wide fender with custom flare, custom wide side skirt with rear varis wide body & sti stock bumper ( please take note it is replica. ) Looking at whole set to go at $3000 ( buyer to bear the labour ) 37. Front STI Original HID Headlamp Looking at $400 (pair) 38. Rear Original Taillamp Looking at $200 (pair) 39. steering rack sti ( just recondition on june 2016 ) Looking $200 *RESERVED BY XXXX5988 40. Original carbon print ganador side mirror ( Minor scratch on the left side ) Looking at $250 41. autronic SM4 standalone ECM with wiring harness Looking at $600 *RESERVED BY XXXX4359 42. BCBR Suspension for PCD114.3x5 Looking at $400 43. STI Original Rear Roof Vane Looking at $70 *RESERVED BY XXXX4327 44. DW 750cc injector top feed Looking at $300